October 21, 2022

How to use a Waterfall Incense Burner - Waterfall Incense Burner

You heard it right, if I say that Incense Waterfall Burners should be among the wonders of the world then I meant it. There is no doubt that these burners are no lesser than any magical force. Their unique shapes and their waterfall shape-type have a soothing effect along with the beautiful aromatic fragrance. They can take your mind into an enchanting state.

What is the Waterfall Incense Burner?

In this world of rapid inventions and innovations, many products got the attention, one such miraculous invention is the Waterfall Incense Burner which is also known as a Backflow burner. Waterfall Incense Burner is a ceramic holder along with which incense cones are used while these cones perfectly get aligned with the base of the burner. The combined effect of both the incense cones and sticks leaves you in wonder as the cones are lit, and the smoke glides along the burner to the bottom, giving the appearance of a mountain with a streaming waterfall incense burner.

Waterfall Incense burners are available in different shapes and sizes, each with its uniqueness and beauty.

How to use the Waterfall Incense Burner?

Well, it does not carry any rocket science to operate a Waterfall Incense Burner. The Waterfall or Backflow Burner uses an effortless natural phenomenon, a few fine and unique incense cones which are circular in shape with a small hole in the bottom are required. These cones and the exceptional structure of the burner make this waterfall incense burner specified. Incense Cones are partly pierced through from the bottom to just under the tip driving it possible for the smoke to stream down through the cone instead of upwards. The Backflow Incense Burner has a small hole in the top via which the smoke slips through and cascades down to the bottom. It does not take much to accomplish this task, we just need to polish the basic familiarity of its science.

You may comprehend that warm air is released when the incense is burned. Considering this difference in air pressure is created between the warm air released by the burning incense and the air around it, the warm air rises and takes the smoke away with it. Just because the Incense cones are hollow and have a small hole in the bottom, cool air from inside the burner reaches the smoke as well. This cool air pulls the smoke downwards through the hole of the burner giving it the spectacular waterfall incense burner effect.

Step-by-step explanation on how to use an Incense Waterfall Incense Burner:

1-Place the burner where no air can interfere

The burner needs to be placed somewhere away from the air as the cloudy smoke of the incense burner can easily fade away. For its best result, it is recommended to use it in-door because even a tiny amount of air be it from the vents or the windows can ruin the waterfall incense burner's effect.

2-Light the Incense Cone

Hold the cone with a pincer. Grab a gas lighter or a matchbox and start lighting from the top of the incense cone and keep lighting it for around 5 to 10 seconds until you see fire on the cone. After it has lit, just blow out the fire from the cone and it will start producing the incense smoke. And if the smoke does not appear, repeat the lighting process.

Incenses cones on paper

3-Placement of the Incense Cone on the Burner

Place the cone on the base of the Backflow burner. There’s no need to worry about the placement of the cone, it usually comes with a product package in which its arrangement is mentioned. There is a pit designed at the surface, where the cone is usually placed. The placement of cones is the least of the concerns.

How to use Incense Sticks in the Waterfall Incense Burner?

The way these incense sticks work in a waterfall incense burner is not much different from that of incense cones. There is no heavy trickery needed to get handy on them. The only difference between the incense sticks for the waterfall incense burner and other incense cones is their base shapes as the incense cones have these special circular bases while the incense sticks have no such circular base and they are very thin instead. You can place these incense sticks anywhere you like. Although, some incense burners come with a dedicated section, especially for these incense sticks.

Burning incense

Hold these Incense Sticks

To properly use these sticks, primarily you need to understand how to hold them appropriately. The best way is to hold them with one hand. From either hand you hold these sticks make sure you have a firm grip, the hand should be clean and it should not be trembling.

Lighting these Incense Sticks

The second step is to light these Incense sticks, start by lighting the tip of the incense sticks with your hand other than that which is holding the stick. Light it for around 5 to 10 seconds because the fire takes time to catch these sticks, so you got to be patient about it. Blow these sticks out once the fire catches them, pure white cloudy smoke can indicate the moment when you can put out the fire.

Place these Incense Sticks

Third and the final step is to place these sticks in your desired place where you would be able to get their maximum effect and enjoy the peaceful and soothing vibes of these incense sticks.

How long do these Incense Cones burn?

The burning time of these waterfall incense cones is different from that of the normal incense cones. The period during which smoke is produced is comparatively short, due to the obvious fact that waterfall incense burner cones are hollow. Consequently, you can enjoy its extremely peaceful waterfall incense burner's effect for about 10 to 15 minutes. The smoke produced by these Waterfall or Backflow incense cones is also heavier and thicker than the smoke produced by traditional incense cones. This heavy and sultry density of the steam enhances the appealing effect of the Waterfall Incense Burner.

Can these Incense Cones be reused?

The answer is yes only in that case if the formerly lit cones are not entirely steamed, so you can reuse them until they are fully extinguished.

Safety Precautions for the Incense Burner

You should be careful when it comes to the placement of The Incense Burner, make sure that the surface you are placing it on is smooth and stable. Make sure there is no passage of air as air would interfere with its exquisite waterfall incense burner effect.
Ensure to keep it away from the reach of children or your pets as they could harm themselves with the burner.
Make sure there is not any fabric or curtain around the burner as these would catch fire from the burner easily, so just be careful about it.

Conclusion

The Incense waterfall incense burner is the most pleasing manner to alleviate and relax your mind and soul. It has this spectral effect that uplifts your spirit and drives your mind way more creatively. You will feel more productive in the presence of Waterfall Incense Burner as it nurtures a serene sensation. Later on, if you are accomplishing a certain productive task, light one up and feel the calming effect. The best part about it is that it is effortless to use and one can readily get the most out of it.

FAQs – Waterfall Incense Burner

1-The Waterfall Incense Burner is not giving the waterfall incense burner effect. Why?

This issue may occur due to the presence of free air on the burner, to maximize the waterfall incense burner experience, you must ensure there is no air where the burner is placed.

2-How long do these Incense cones work?

The average burning time of these Incense cones is between 15 to 20 minutes.

3-Can these Incense Cones be reused?

Yes, you can reuse these Incense cones only if they are not completely burnt from the last time.

4-Is every incense cone compatible with the burner?

Generally, the circular cones come with a backflow burner. But it’s always best to buy these cones from the same shop you bought the burner from.

5-These Incense cones not catching fire?

You must put these cones on fire for around 10 seconds while making sure there is no air around, if it still doesn’t catch the fire, repeat the process.